คำอธิบาย

Product Details
Dayton Audio DSA175-PR 6-1/2″ Designer Series Aluminum Cone Passive Radiator

The Dayton Audio Designer Series passive radiators are excellent general-purpose passives suitable for replacement or for new construction. A built-in mass disc offers a good starting point for most designs, and a convenient M5 threaded hole (screw included) allows different types of weights to be added if desired. Cosmetically and mechanically, these passives match Dayton Audio’s Designer Series drives, with a black anodized aluminum cone and medium-roll rubber surround for clean excursion and long life. The possibilities with these passives are endless, from stand mount two-ways to portable battery powered speaker systems.

Specifications: • Fs: 26.8 Hz • Vas: 0.95 cu. ft. • Qms: 4.30 • Cms: 1.15 mm/N • Rms: 1.2 kg/s • Mms: 30.7 g • Sd: 128.7 sq. cm. • Xmax: 8 mm • Dimensions: Overall diameter: 6.91″, Cutout diameter: 5.67″, Depth: 1.85″.

Note: Adding mass to the passive radiator will decrease Fs and increase Qms.

Tip: As a general rule, the passive radiator(s) should have at least double the displacement of air (Vd) as the active woofer(s)/subwoofer(s) in the system.
To calculate Vd: Sd x Xmax = Vd

Product Specifications
Nominal Diameter
6-1/2″
Thiele-Small Parameters
Resonant Frequency (Fs)
26.8 Hz

Mechanical Q (Qms)
4.30
 
Compliance Equivalent Volume (Vas)
0.95 ft.³

Mechanical Compliance of Suspension (Cms)
1.15 mm/N
 
Diaphragm Mass Inc. Airload (Mms)
30.7g

Maximum Linear Excursion (Xmax)
8 mm
 
Surface Area of Cone (Sd)
128.7 cm²
Materials of Construction
Cone Material
Aluminum

Surround Material
Rubber
 
Basket / Frame Material
Steel
Mounting Information
Overall Outside Diameter
6.91″

Baffle Cutout Diameter
5.67″
 
Depth
1.85″

Bolt Circle Diameter
6.54″
 
# Mounting Holes
5